|
 |
 |
PCIE-1-KIT |
|
| |
The PCIE-1-KIT includes:
| PCIE-1_1x1 |
|
1-lane HAPS daughter board |
| PCIE-4_CABLE |
|
4-lane cable, 1 m. in length |
| PCIE-4_PC |
|
4-lane host interface board |
|
PCIE-1-KIT is a one-lane PCI Express solution for HAPS, including
a HAPS daughter board, a host interface board for the PC, and a cable to connect the two boards together.
The use of a standard PCI Express cable to connect a computer with a HAPS system gives a mechanically stable system interfacing to PCI Express
at full speed.
* The PCI Express interface is proven to work smoothly with an IP Core from PLDA.
|
 |
 |
|
| Features: |
- PCI Express x1, v1.0a and v1.1 compliant
- Data transfer rate up to 1.6 Gbit/s
- Front panel switch to easy disconnect the system from the PCI Express bus
- Clock jitter attenuator with selectable bandwidth
- PXPIPE interface to HAPS
- Uses Philips PCI Express PHY (PX1011A-EL1/G)
- Onboard voltage generation from a single 2.5V source supplied from the HAPS connector
- HAPS connector conforms to the HapsTrak standard
- Cable compliant with PCI Express External Cabling Specification Rev. 0.5
- Host interface and cable are both 4-lane capable
NOTE 1:
By replacing PCIE-4_PC, with an Express Card PCIe host interface board, HAPS can be connected to laptops with Express Card Slots.
NOTE 2:
For Local Bus operation, see PCIE-1-LBI |
| |
| Contact us about HAPS: |
|
|
"We have 3000 signals between two FPGAs, and it runs smoothly! This was achieved by HAPS great I/O flexibility and Certify's pin multiplexing feature."
- Mihai Munteanu, Development Engineer, Philips Semiconductors in Zürich, Switzerland
|
| |
 |
| |
| 
|
|
Products 