 |
Miscellaneous |
|
| |
| BIO1 |
|
Data Sheet |
|
| BIO1 is perfect when a simple and easy-to-use debugging function is needed. The board has LED indicators, push buttons and a USB port - all controlled via a GPIO header on a HAPS motherboard. |
|
 |
|
|
| CONF30 |
|
Data Sheet |
|
| The primary use of the CONF30 board is to configure the FPGAs on motherboards in the HAPS-30 family from CompactFlash devices. Configuration is controlled via an address select switch and a reset button. Status is indicated by a set of LEDs. CONF30 also has ten push buttons and five LEDs for general purpose use. |
|
 |
|
|
| LAB_1x1 |
|
Data Sheet |
|
| In order to get signals onto and out from your HAPS design, you need some kind of I/O subsystem. The LAB_1x1 board is a simple prototyping board that you can use to break out signals from a connector on the HAPS board to a more convenient 0.1" grid, and/or build a simple I/O device or adapter. |
|
 |
|
|
| STB1_1x1 |
|
Data Sheet |
|
| Used in combination with the self tests for motherboards in the HAPS-30 and HAPS-20 families. With STB1_1x1 it's possible to detect open circuits in any HapsTrak connector. The board also has four LEDs to indicate the I/O voltage. |
|
 |
|
|
| STB2_1x1 |
|
Data Sheet |
|
| STB2_1x1 is a board for testing purposes, used in combination with the self-tests for motherboards in the HAPS-50 series. With STB2_1x1 it’s possible to detect open circuits as well as power and ground faults in any HapsTrak II connector. |
|
 |
|
|
| TERM-TOP_1x1 |
|
Data Sheet |
|
| TERM_TOP_1x1 is a termination board, especially designed for terminating global buses between several motherboards in the HAPS-50 series. Termination boards are recommended on the first and last connector in the chain. |
|
 |
|
|
| HapsMap |
|
|
|
| HapsMap is a pin assignment software that generates Xilinx UCF files for all FPGAs used in your system. Very useful and time saving for users who don't have access to Certify and are using single FPGA synthesis software, like Synplify Pro or Synplify Premier. HapsMap is available in both Windows and Linux versions. |
|
 |
|
|
| HAPS Case (HAPS-30/50) |
|
Data Sheet |
|
| The HAPS case is a 19", 3 HU mechanical housing for single or stacked HAPS boards, with room for daughter boards and user subsystems. |
|
 |
|
|
Products 